| | |
|
| |
| | |
|
|
|
Blue Sea Systems #7622 Solenoid ML 500A 12V ACR w/manCtrl
|
BSS7622
|
|
Heavy duty automatic charging relay with manual control, 12 volts #7622
|
1 in stock
Detailed Description
Manual control switch provides an added level of safety allowing control with or without power, and offering "Locked Off" capability for servicing
Includes ML-Series Remote Control Contura Switch PN 2146
500 Ampere continuous rating
Magnetic Latch (ML)-ACR draws very low current (<10 mA to monitor terminal voltage) in the "ON" or "OFF" states, and draws moderate current for very short time when changing state
Start Isolation (SI)-Can be configured for temporary isolation of House loads from Engine circuit during engine cranking to protect sensitive electronics
Engine Isolation (EI)-Can be configured for isolation of two engines while both are running to protect engine electronics and maximize alternator output
Senses charging on two battery banks
Supports high-output alternators up to 500 Amps
LED output to remotely indicate when batteries are combined, isolated, in voltage lockout, in Start or Engine isolation
3/8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance
7/8" (22mm) stud length accepts multiple cable terminals
Label recesses for circuit protection
Silver alloy contacts provide high reliability for switching live loads
CE marked
Meets ISO 8846 MARINE and SAE J1171 MARINE external ignition protection requirements
Waterproof rated IP66protected against powerful water jets
Specification
Cranking Rating: 10 sec. 2,500 Amps
Intermittent Rating: 5 min. 2x (4/0) wire-700 Amps
Continuous Rating 2x (4/0) wire-500 Amps
Switching Cycles 100,000 Cycles
Amperage Operating Current <40 mA when changing state
Relay Contact Position
Combine (30 sec.) 13.5V DC @12 Volts/27.0V DC@24 Volts
Combine (90 sec.) 13.0V DC@12 Volts/26.0V DC@24 Volts
Open (10 sec.) 12.35V DC@12 Volts/24.7V DC@24 Volts
Open (30 sec.) 12.75V DC@12 Volts/25.5V DC@24Volts
Open High 16.2V DC@12 Volts/32.4V DC@24 Volts
Live Current Switching 300A@12V DC-10,000 Cycles
Terminal Stud Size 3/8"-16 (M10)
Terminal Stud Torque 140 in-lb (15.82 Nm)
Ring Terminal Size 3/8" (M10)
Cable Clearance For 4/0 AWG Cables 1.18"
Cable Size to Meet Ratings 4/0 AWG
Additional information
Instruction manual
360 Series remote control battery switch panel #1147
|
Linking busbar for ACR's #9160
| |
Product Reviews
|
|
|