Dont forget to order some extra circuit breakers for the blank slots. All the pre installed distribution breakers are 15 Amps so if you are not sure I suggest you order a few 5A, and few 10A and a few 20A breakers.
The AC part of this panel is set up for dual 30 Amp Shore Power service serving two legs of 120 Volts. By using the transfer switch a single shore power cord can power the entire panel during periods of low demand. A generator can power both legs and its main breaker is 50 Amps. There are three 15 Amp circuit breakers pre-installed on each leg and there is space for three additional AC breakers on each leg.
The DC part of this panel is set up with a 100 Amp main breaker, 13 pre-installed 15 Amp branch circuit breakers and space for six additional breakers.
Detailed specification, drawings, and description.
