Circuit Breaker Panels
Traditional Flat Metal Panels
AC Main + Branch Panels
> Blue Sea 8406 AC Panel 8 position with Main & Multimeter
Blue Sea Systems #8406 AC panel 6 position w/Main & Multimeter
Blue Sea 8406 AC Panel 8 position with Main & Multimeter
Questions about this item? Be the first to ask here.
Put me on the Waiting List
Add to Wish List
This panel comes complete with the 8247 AC digital multimeter that reads out in volts, amps, watts and frequency
Red reverse polarity indicating LED
All hot, neutral and safety ground buses installed, fully pre-wired
All circuit label positions are backlit - No kit required
"ON" indicating LEDs installed in all circuit positions
Maximum panel amperage - 50 Amperes, fitted with a 30 Amp main breaker
MIL-C-5541C or equivalent immersion undercoating for lifetime corrosion resistance
Two-part polyurethane slate gray finish
Heavy 1/8" aluminum 5052 alloy
Dimensions 11.25" high x 5.25" wide
Countersunk mounting holes throughout
Detailed installation instructions and cutout template included
Includes set of 30 common Large Format Labels
Over 500 individual Labels available
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to
I normally use 10 awg wire for the 30 Amp Main and 12 awg wire for the other 15 Amp circuits. You can get away with less in certain circumstances but if you follow the sizes above you are covered in almost all cases.
See my blog post for more details.
When ordering terminals to wire these panels it might be useful to know that the circuit breakers have #10 screws and the busbars have #8 screws, I prefer to use ring terminals for maximum security but the ABYC does also permit the use of captive fork terminals that have an indent or bend at the end.
Excerpt from the
The Purpose of a Panel
There are six purposes of a marine electrical panel:
? Power distribution
? Circuit (wire) protection
? Circuit ON/OFF switching
? Reverse Polarity Indication
? Metering of voltage and amperage (In panels with meters)
? Condition Indication (circuit energized)
? American Boat and Yacht Council (ABYC) Standards and Recommended Practices for Small Craft sections: E-1, E-3, E-9.
? United States Coast Guard 33 CFR Sub Part 1, Electrical Systems.
Blue Sea 7214 Single Pole Circuit Breaker 20 Amps White
Ancor 10/3 Triplex Boat Cable 10/3 - Per Foot
Minimum order 10 ft.
Marine W12/3 Triplex Boat Cable 12/3 - Per Foot
Minimum order 10 ft.
Pacer Marine Heat Shrink Ring Terminals 12-10 awg #10 Ring (5 pack)
Blue Sea 8110 Mini Clamp-On Hand Held Multimeter
Blue Sea Systems Custom Made Circuit Breaker Panel
Put your name on the waiting list for this item
Recently Viewed Items