The custom panel program from Blue Sea Systems lets you design your own panel online and produces an image of what it will look like. Its not quite the same as seeing it installed of course. Here is how one panel turned out.
Peter Kennedy has been in business since 1991 designing, installing and servicing marine electrical systems. The purpose of this blog is to offer support to both professional installers and do-it-yourself boat owners who wish to undertake this work themselves.
- Alternators
- System Integration
- Battery Chargers
- Battery Combiners
- Batteries (Conventional)
- Batteries (Lithium Ion)
- Battery Monitoring
- Circuit Breaker Panels
- Circuit Protection
- Corrosion
- ELCI's
- Electrical Standards
- Gallery
- Victron MultiPlus and Quatro
- Lighting
- PKYS online store
- Safety
- Shore Power
- Software
- Solar
- Camper Vans
- News
- Projects
- Techniques and How to...
- Troubleshooting
- Tools and Equipment
- Test it out
- New Victron Color Control GX Manual released
- Victron VE Configure documentation update
- Signal K and Victron Energy integration
- Victron Data Cabling
- How to deal with a boat that is tripping the dock Ground Fault circuit breaker
- Mounting proceedure for dual foot alternators
- A comparison between the XT and AT series alternators by Balmar
- Trending data added to Victron Connect App
- Firmware updates with Victron Connect
- July 2019
- June 2019
- May 2019
- April 2019
- March 2019
- February 2019
- January 2019
- December 2018
- November 2018
- October 2018
- August 2018
- July 2018
- June 2018
- May 2018
- April 2018
- March 2018
- February 2018
- December 2017
- November 2017
- October 2017
- September 2017
- August 2017
- July 2017
- June 2017
- May 2017
- February 2017
- December 2016
- November 2016
- June 2016
- November 2015
- September 2015
- August 2015
- July 2015
- June 2015
- May 2015
- April 2015
- February 2015
- October 2014
- May 2014
- March 2014
- January 2014
- December 2013
- November 2013
- October 2013
Peter Kennedy has been in business since 1991 designing, installing and servicing marine electrical systems. The purpose of this blog is to offer support to both professional installers and do-it-yourself boat owners who wish to undertake this work themselves.
Blue Sea Systems custom panel: What will it look like when installed?
Posted by Peter Kennedy on 3/1/2018
to Circuit Breaker Panels
The custom panel program from Blue Sea Systems lets you design your own panel online and produces an image of what it will look like. Its not quite the same as seeing it installed of course. Here is how one panel turned out.
Custom panel rear view
Posted by Peter Kennedy on 7/10/2017
to Circuit Breaker Panels
This is an actual panel built to order for a customer and it is going in a specialized off road vehicle.
Custom sub-panel for Amel 54
Posted by Administrator on 9/12/2015
to Circuit Breaker Panels
Small sailboat custom panel that incorporates some existing equipment
Posted by Administrator on 3/26/2014
to Circuit Breaker Panels
Sabre 54 Fly Bridge Sedan uses Blue Sea Systems custom panels
Posted by Peter Kennedy on 11/6/2013
to Circuit Breaker Panels
The circuit breaker panels on this Sabre 54 Fly Bridge Sedan and custom made from the Blue Sea Systems 360 Series modular panel system.
A simple 230 Volt AC panel example
Posted by Peter Kennedy on 10/19/2013
to Circuit Breaker Panels
Blue Sea Systems Custom 360-Series Circuit Breaker Panels.This is a very simple 230 Volt AC panel that was shipped to New Zealand. The boat owner already had a single 360-Series panel on board which he liked so much he decided to redo the entire AC system and so this panel has a blank which will be replaced by his existing panel.
Custom AC/DC powerboat panel example
Posted by Peter Kennedy on 10/19/2013
to Circuit Breaker Panels
This boat from Annapolis MD got a new Blue Sea Systems custom 360-Series AC/DC Panel. It was supplied by PKYS and installed by Yacht Electronic Systems.
40ft Sailboat custom panel
Posted by Administrator on 10/19/2013
to Circuit Breaker Panels
This panel was designed for a 40 ft. sailboat. It was designed by PKYS in conjunction with the owner who installed it all by himself.