Blog Home

 

  

Neat wiring is hard to achieve but it makes everything about the project go better. Take a look at these project photos if you need a bit of inspiration.

This 2017 Dodge Promaster 3500 Van has been tricked out for boondocking and is loaded with solar panels and a Victron Lithium Iron Phosphate battery system with all the trimmings all supplied by PKYS

Read a review written by one user who installed a BMV Energy Monitor, MPPPT solar charge controller and smart phone display in his camper

This is the story of the final installation of Victron equipment on this off-grid solar house, this house has a twist though, it is made of straw bales......

Here is a photo and description of the installation of an Altmount kit on a Universal M35 on a Nonsuch 30

This was my first time installing one of the Balmar Serpentine kits and I was a bit apprehensive. Although I had read the instructions several times it still isn't quite the same as actually doing it. Read how it all turned out.........

Question: I need to replace my alternator for a Yanmar 3YM30 /2006. It is a Hitachi 60amp and I am thinking in replacing it with a higher amp output. I might then need to replace perhaps the pulleys for the water pump and the crank shaft and then of course consider a serpentine or other type of belts. Would appreciate your suggestions?. Thanks.

This 73 ft Yawl "Bolero" designed by Sparkman and Stephens and originally launched in 1949 was the first major electrical refit project undertaken by Peter Kennedy Yacht Services.