Victron Energy 1000 Amp 50 mV shunt for use with BMV Meters

Excerpt from the BMV instruction manual about the use of alternative shunts 

The BMV is supplied with a 500A / 50mV shunt. For most applications, this should be suitable; however the BMV can be configured to work with a wide range of different shunts. Shunts of up to 9999A, and/or 75mV can be used. When using a shunt other than the one supplied with the BMV, please proceed as follows: 

1. Unscrew the PCB from the supplied shunt. 
2. Mount the PCB on the new shunt, ensuring that there is good electrical contact between the PCB and the shunt. 
3. Connect the shunt and BMV as shown in the quick installation guide. 
4. Follow the Setup wizard (section 1.1 and 1.2). 
5. After completion of the Setup wizard, set the proper shunt current and shunt voltage according to section 4.2.5, setting number 65 and 66.