Victron MultiPlus 12/3000/120-50 120V VE.Bus Inverter/Charger

Victron Energy Multi Plus 12/3000/120-50 120V VE Bus Inverter/Charger (PMP123021102)

On sale ~~$1,511.00~~ $1,284.35

All the features of a sine wave inverter and charger in one compact enclosure. Programmable for use with all battery types including Lithium Ion

Questions about this item? Ask here.

p/n: PMP123021102

Availability: In stock

Quantity

Description
Questions and Answers
What's in the Box
Specifications
Additional information

THESE ARE OUT OF STOCK UNTIL LATE SEPTEMBER, SORRY. IN THE MEANTIME THE UL VERSION IS AVAILABLE WITH IS IDENTICAL EXCEPT FOR ITS UL STICKER. Its a bit more expensive because getting UL Certification is a costly endeavour. Check out Victron Energy Multi Plus 12/3000/120-50 120V VE Bus Inverter/Charger (UL Listed)

All the features of a sine wave inverter and charger in one compact enclosure. UPS functionality with a seamless transfer from external AC to inverter supply. This new model is more compact in size and features a 50 amp transfer switch. Ideal for marine or alternative energy installations.

Multi-function inverter / charger with intelligent power management
120 Volt 60 Hz output at 3000 VA continuous
Works as a UPS system for uninterruptable power
Parallel capability up to 18 kVA when used with multiple units
Three phase capable when three units are connected together
Split phase capable when two units are connected together to produce 120/240 volts
Charger power control option for use when incoming power is limited (requires external remote panel)
Power assist function to assist starting large loads when running from generator power
Peak power 6000 Watts
Max efficiency 93%
Four stage adaptive charging - charger can be programmed for different battery types. A temperature sensor is included.
Dual bank charging (120 amps for main bank and 4 amps for auxiliary bank)
Easy setup with dipswitches or a computer (computer setup requires MkIIUSB interface)
Now with 5 year warranty
Read about Multi Plus Magic on the Victron Blog
Please use Victron VE Bus cables when connecting additional equipment
Now programmable on a Mac as well as on a PC

Tech Tip

We have added a lot of content about the Victron MultiPlus on our Blog. Here are the links:

Using the Phoenix MultiPlus with a small portable generator

User manual Phoenix Multi Plus 120V 60Hz

Quick install guide

Manufacturers website.

Read about the new iPhone and Android Apps

Q: Is there a Bluetooth App that can interact with this unit like what is available for the MPPT 100/20 and BMV-712?

Asked by: Bob Pogue - 7/15/2018

A: There is a Bluetooth adapter available that can be used for basic functions like on/off, charge current adjustment* and status reporting. It can't currently be used for programming. This is the VE Bus Smart dongle and the part number is ASS030537010

*Charge current adjustment not available when used with Victron Smart Lithium Batteries and VE Bus BMS

Updated August 8th 2019

Was this answer helpful? 5 of 5 Customer(s) found this Answer helpful.

Answer provided by: Peter Kennedy (7/20/2018)

Submit an answer

Q: Hello Can you ship To Switzerland ???

Asked by: Peter - 7/22/2016

A: At PKYS we ship all over the world. Dont forget this is a 120 Volt 60 Hz unit

Was this answer helpful? 4 of 4 Customer(s) found this Answer helpful.

Answer provided by: PKYS (7/22/2016)

Submit an answer

Q: Several bloggers state they have talked with Victron in the past about 3000W Multi Plus units not being compatible with Lithium Iron phosphate Battery Banks, but I see Peter Kennedy posted on 11/9/2018 about the Multi Plus unit stating, "It is especially programmable for use with Lithium Ion battery systems." Is Peter only referring to the 2000W units, or are all Multi Plus units now Lithium compatible? I'm specifically interested in the Multi Plus 12V/3000W/120-50 120V VE.Bus Inverter/Charger PMP123021102.

Asked by: B Miller - 5/10/2019

A: All of the VE Bus inverter chargers and Quattros are equally programmable. This has the be the most programmable system out there, just about everything is adjustable. You can program it to do more stuff than you could possibly imagine. Take a look at my Blog for several articles about programming.

Was this answer helpful? 4 of 4 Customer(s) found this Answer helpful.

Answer provided by: Peter Kennedy (5/10/2019)

Submit an answer

Q: Can this be mounted with zero overhead clearance.... up against a ceiling ?

Asked by: Davew - 11/3/2017

A: The instruction manual requires you to have some clearance around this unit for ventilation and recommends 10 cm on all sides.

The way this mounts is you screw a bracket to the wall then you hang the inverter on the bracket. Because of that you need a small clearance to lift it over the bracket. On my demo system I wanted it as close as possible to the ceiling and it ended up when installed about 1/2" clearance. See our short video in the "additional information" tab.

Was this answer helpful? 3 of 3 Customer(s) found this Answer helpful.

Answer provided by: Peter Kenendy (11/3/2017)

Submit an answer

Q: Hi, how many amps will the victron 12/3000/120 pull from shore/gen when it is charging batteries at it's max of 120 amps? Thanks!

Asked by: Kevin - 1/18/2020

A: Approximately 12 amps

Was this answer helpful? 3 of 3 Customer(s) found this Answer helpful.

Answer provided by: Peter Kennedy (1/18/2020)

Submit an answer

Q: Does this unit have a built in solar charge controller? and if not can you tell me if any do ?

Asked by: steve - 6/18/2018

A: There is a European version called the "Easy Solar" which has a charge controller and Inverter charger in one but it is not yet available for 120 Volts.

Was this answer helpful? 2 of 2 Customer(s) found this Answer helpful.

Answer provided by: Administrator (7/25/2018)

Submit an answer

Q: In your videos you mention having a DC Disconnect. In my system I plan to have a BlueSea remote disconnect switch at the DC panel. Is this an appropriate method for disconnecting the Inverter when NOT on shore power or is the remote required?

Asked by: Blackburn Eric - 7/29/2019

A: Having a DC disconnect is an ABYC requirement and is in addition to any remote panel you may decide to install. A DC disconnect provides a secure way to de-power the system for maintenance or troubleshooting purposes, or to turn it off in the event of a malfunction, or for winter storage.

Was this answer helpful? 2 of 3 Customer(s) found this Answer helpful.

Answer provided by: Peter Kennedy (7/29/2019)

Submit an answer

Q: Can this be mounted on a horizontal surface, such as a shelf?

Asked by: Ben - 10/9/2019

A: We often get asked if these items can be mounted lying down. This attachment method will work in that orientation just fine, you just have to make sure the device is firmly seated on the bracket because you wont have gravity to help you. With the device lying down it will not have natural convection to assist the fan for cooling purposes. That means you need to take additional care to ensure it is in a location with adequate space and ventilation. If it becomes too warm the fan will run longer and output will be reduced.

Was this answer helpful? 2 of 2 Customer(s) found this Answer helpful.

Answer provided by: Peter Kennedy (10/10/2019)

Submit an answer

Q: 24V version?

Asked by: svkatface - 9/20/2016

A: Yes the equivalent 24 volt version is the Victron Multi Plus 24/3000/70-50 120V VE Bus Inverter/Charger

Was this answer helpful? 1 of 1 Customer(s) found this Answer helpful.

Answer provided by: Peter Kennedy (9/20/2016)

Submit an answer

Q: If I have this connected to shore power. My rv has a 400Ah lithium ion battery bank. How long would it take to charge my batteries if they were drawn down to 20%? Thank you

Asked by: Randy - 10/29/2018

It is a 120 Amp charger. If your 400 amp hour lithium battery is down 20% then you need to charge it back 80 Amp hours so that would take about 40 minutes.

Was this answer helpful? 1 of 1 Customer(s) found this Answer helpful.

Answer provided by: Administrator (6/29/2019)

Submit an answer

Q: What are the dimensions of the Victron 3000 inverter/charger in inches installed? I have a very tight place I'm looking at mounting it with room for ventilation

Asked by: Gregg L Hershberger - 2/27/2020

A: The size is 14.3 x 10.2 x 8.6 inches You need to allow some room to lift it over the mounting bracket, room for the cables to come in, and room for ventilation, so don't make it too tight!

Was this answer helpful? 1 of 1 Customer(s) found this Answer helpful.

Answer provided by: Peter Kennedy (2/27/2020)

Submit an answer

Q: What is the ac input current for this unit?

Asked by: Larry - 2/28/2020

A: The AC input current limit is 50 amps and this is a combination of the power that it can carry through to the AC loads and the power that is is using for charging the batteries. The limit can be permanently adjusted in the software of if you get one of the remote controls available it can be adjusted on the fly as needed. The maximum amount of power that it can consume for charging is limited by its 120 Amp charge rating and so that translates to approximately 12 Amps at 120 volts. The maximum charge current can be adjusted permanently in the software or on the fly as described in the paragraph above. When an input current limit has been set in the remote the charge current will automatically adjust to keep the total consumption within the limits set.

Was this answer helpful? 1 of 1 Customer(s) found this Answer helpful.

Answer provided by: Peter Kennedy (2/28/2020)

Submit an answer

Q: Any deals going on right now?

Asked by: Walter Vincent - 8/25/2020

No Answers have been submitted yet.

Submit an answer

Questions about this item? Ask here.

MultiPlus	12/3000/120
PowerControl	Yes
PowerAssist	Yes
Transfer switch (A)	50
Parallel and 3-phase operation	Yes
Inverter
Input voltage range (V DC)	9,5 - 17 V ; 19 - 33 V
Output	Output voltage: 120 VAC +/- 2%;Frequency: 60 Hz +/- 0,1% (1)
Cont. output power at 75 øF (VA) (3)	3000
Cont. output power at 75 øF (W)	2500
Cont. output power at 100 øF (W)	2200
Peak power (W)	6000
Maximum efficiency (%)	93
Zero-load power (W)	15
Zero load power in AES mode (W)	10
Zero load power in Search mode (W)	4
Charger
AC Input	Input voltage range: 95-140 VAC ; Input frequency: 45 - 65 Hz ; Power factor: 1
Charge voltage 'absorption' (V DC)	14,4
Charge voltage 'float' (V DC)	13,8
Storage mode (V DC)	13,2
Charge current house battery (A)(4)	120
Charge current starter battery (A)	4
Battery temperature sensor	Yes
General
Auxiliary output(5)	Yes (32A)
Programmable relay(6)	Yes (3x)
Protection(2)	a - g
VE.Bus communication port	For parallel and three phase operation, remote monitoring and system integration
General purpose com. port(7)	Yes (2x)
Remote on-off	Yes
Common Characteristics	Operating temp. range: 0 - 120 degF (fan assisted cooling) ;Humidity (non condensing): max 95%
Enclosure
Common Characteristics	Material & Colour: aluminum (blue RAL 5012) ; Protection category: IP 21
Battery-connection	M8 bolts (2 plus and 2 minus connections)
120 V AC-connection	Screw-terminal 6 AWG max
Weight	19kg 40 lbs
Dimensions (hxwxd in mm and inches)	62 x 258 x 218 mm 14.3 x 10.2 x 8.6 inch
Standards
Safety	EN 60335-1, EN 60335-2-29
Emission Immunity	EN55014-1, EN 55014-2, EN 61000-3-3
1) Can be adjusted to 60 HZ; 120 V 60 Hz on request
2) Protection key: Output short circuit Overload Battery voltage too high Battery voltage too low Temperature too high 230 VAC on inverter output Input voltage ripple too high
3) Non linear load, crest factor 3:1
4) At 75 øF ambient
5) Switches off when no external AC source available
6) Programmable relay that can a. o. be set for general alarm,DC undervoltage or genset start/stop function AC rating: 230V/4A DC rating: 4A up to 35VDC, 1A up to 60VDC
7) A. o. to communicate with a Lithium Ion battery BMS

Victron Energy Multi Plus 12/3000/120-50 120V VE Bus Inverter/Charger (UL Listed)

~~$1,679.00~~ $1,427.15 Sale

Available

Add To Cart

Victron Energy ASS030140000 MK3-USB Interface (VE.Bus to USB)

~~$81.00~~ $68.85 Sale

In stock

Add To Cart

Victron Energy BAM010700000 BMV 700 Precision Battery Monitor

~~$169.00~~ $143.65 Sale

In stock

Add To Cart

Victron Energy BPP010300100 Color Control GX

~~$608.00~~ $516.80 Sale

In stock

Add To Cart

Blue Sea 5502 Class-T Fuse Block 225-400A

~~$59.49~~ $37.53 Sale

In stock with Free Shipping for orders over $45

Add To Cart

Victron Energy DMC000200010 Multi Control GX for Multi-Plus and Quattro

~~$154.00~~ $130.90 Sale

In stock

Add To Cart

Crimp on Pin Connector for 10-12 awg wires - (By the piece)

$0.55

Quantity discounts available

Add To Cart

Victron Energy Multi Plus 12/3000/120-50 120V VE Bus Inverter/Charger (PMP123021102)

Q: Is there a Bluetooth App that can interact with this unit like what is available for the MPPT 100/20 and BMV-712?

Q: Hello Can you ship To Switzerland ???

Q: Can this be mounted with zero overhead clearance.... up against a ceiling ?

Q: Hi, how many amps will the victron 12/3000/120 pull from shore/gen when it is charging batteries at it's max of 120 amps? Thanks!

Q: Does this unit have a built in solar charge controller? and if not can you tell me if any do ?

Q: In your videos you mention having a DC Disconnect. In my system I plan to have a BlueSea remote disconnect switch at the DC panel. Is this an appropriate method for disconnecting the Inverter when NOT on shore power or is the remote required?

Q: Can this be mounted on a horizontal surface, such as a shelf?

Q: 24V version?

Q: If I have this connected to shore power. My rv has a 400Ah lithium ion battery bank. How long would it take to charge my batteries if they were drawn down to 20%? Thank you

Q: What are the dimensions of the Victron 3000 inverter/charger in inches installed? I have a very tight place I'm looking at mounting it with room for ventilation

Q: What is the ac input current for this unit?

Q: Any deals going on right now?

Sign up for our newsletter

Related Items

Recently Viewed Items