PCH012050001

Victron Energy PCH012050001 Phoenix 12/50 Battery Charger 12 Volt

On sale ~~$769.00~~ $653.65

12 volt 50 amp battery charger with universal input voltage 90-265 volts

Questions about this item? Ask here.

p/n: PCH012050001

Availability: Temporarily out of stock - normally available within two weeks

Quantity

Description
Questions and Answers
Specifications
Additional information

Adaptive 4-stage charge characteristic: bulk absorption float storage
BatterySafe mode to prevent gassing
Storage mode - automatically operates once per week.
Temperature compensation
Voltage sense direct from battery
Universal 90-265V AC input voltage range
Computer interface with optional connector
Capable of supplying an equalization charge for battery conditioning.
Manufacturers datasheet
Instruction manual

Tech Tip

The Mk2 USB interface is available to program this with a PC running VE Configure. If you are intending to do any advanced programming this should be considered essential. Although in theory it is possible to program without the interface many have tried and few have succeeded, Take a look at the instructions and decide for yourself.

Victron Energy ASS030130010 MK2-USB Interface (VE.Bus to USB) for Phoenix Charger

~~$91.00~~ $77.35 Sale

Temporarily out of stock - normally available within two weeks

Add To Cart

Victron Energy REC010001110 Phoenix Charger Control

~~$110.00~~ $93.50 Sale

In stock

Add To Cart

Phoenix Charger	12/50
Input voltage range (V AC)	90-265
Input voltage range (V DC)	90-400
Frequency (Hz)	45-65
Power factor	1
Charge voltage 'absorption' (V DC)	14,4
Charge voltage 'float' (V DC)	13,8
Storage mode (V DC)	13,2
Charge current house batt. (A) (2)	50
Charge current starter batt. (A)	4
Charge characteristic	4 stage adaptive
Battery capacity (Ah)	200-800
Temperature sensor	?
Can be used as power supply	?
Forced cooling	?
Protection (1)	a,b,c,d
Operating temp. range	-20 to 60øC (0 - 140øF)
Humidity (non condensing)	Max 95%
Enclosure
Material & Colour	Aluminium (blue RAL 5012)
Battery-connection	M6 studs
AC-connection	Screw-clamp 4 mmý (AWG 11)
Protection category	IP 21
Weight kg (lbs)	3,8 (8)
Dimensions (h x w x d in mm and inches)	350 x 200 x 108 mm (13.8 x 7.9 x 4.3 inch)
Standards
Safety	EN 60335-1, EN 60335-2-29
Emission Immunity	EN 55014-1, EN 61000-3-2,
Automotive Directive	EN 55014-2, EN 61000-3-3
Vibration	IEC68-2-6:10-150Hz/1.0G
1) Protection key: Output short circuit Battery reverse polarity detection Battery voltage too high Temperature too high
2) Up to 40 øC (100 øF) ambient

Victron Energy PCH012050001 Phoenix 12/50 Battery Charger 12 Volt

Q: Does the 50amp refer to the input to the charger? I have a 30 amp coach do I need the 12V 30a unit?

Q: does this charger have a shut off mode if the battery is completely discharged?

Related Items

Recently Viewed Items