Victron MultiPlus 12/3000/120-50 120V VE.Bus Inverter/Charger

Victron Energy PMP123021102 Multi Plus 12/3000/120-50 120V VE Bus Inverter/Charger

On sale ~~$1,470.00~~ $1,249.50

Available while stocks last only

Questions about this item? Ask here.

p/n: PMP123021102

Availability: In stock

Quantity

Description
Questions and Answers
What's in the Box
Specifications
Additional information

Available while stocks last only. When these are gone the replacement will be the UL Listed version of the same item. There are also a couple of different versions of the 12/3000 MultiPlus-II

Multi-function inverter / charger with intelligent power management
120 Volt 60 Hz output at 3000 VA continuous
Works as a UPS system for uninterruptable power
Parallel, split phase and three phase capability with multiple units
Charger power control option for use when incoming power is limited (requires external remote panel)
Power assist function to assist starting large loads when running from generator power
Peak power 6000 Watts
Max efficiency 93%
Four stage adaptive charging - charger can be programmed for different battery types. A temperature sensor is included.
Dual bank charging (120 amps for main bank and 4 amps for auxiliary bank)
Easy setup with a computer. (requires Mk3 USB interface)
5 year warranty
Please use Victron VE Bus cables when connecting additional equipment

Tech Tip

We have added a lot of content about the Victron MultiPlus on our Blog. Here are the links:

Q: Is there a Bluetooth App that can interact with this unit like what is available for the MPPT 100/20 and BMV-712?

Asked by: Bob Pogue - 7/15/2018

A: There is a Bluetooth adapter available that can be used for basic functions like on/off, charge current adjustment* and status reporting. It can't currently be used for programming. This is the VE Bus Smart dongle and the part number is ASS030537010

*Charge current adjustment not available when used with Victron Smart Lithium Batteries and VE Bus BMS

Updated August 8th 2019

Was this answer helpful? 5 of 5 Customer(s) found this Answer helpful.

Answer provided by: Peter Kennedy (7/20/2018)

MultiPlus	12/3000/120
PowerControl	Yes
PowerAssist	Yes
Transfer switch (A)	50
Parallel and 3-phase operation	Yes
Inverter
Input voltage range (V DC)	9,5 - 17 V ; 19 - 33 V
Output	Output voltage: 120 VAC +/- 2%;Frequency: 60 Hz +/- 0,1% (1)
Cont. output power at 75 øF (VA) (3)	3000
Cont. output power at 75 øF (W)	2500
Cont. output power at 100 øF (W)	2200
Peak power (W)	6000
Maximum efficiency (%)	93
Zero-load power (W)	15
Zero load power in AES mode (W)	10
Zero load power in Search mode (W)	4
Charger
AC Input	Input voltage range: 95-140 VAC ; Input frequency: 45 - 65 Hz ; Power factor: 1
Charge voltage 'absorption' (V DC)	14,4
Charge voltage 'float' (V DC)	13,8
Storage mode (V DC)	13,2
Charge current house battery (A)(4)	120
Charge current starter battery (A)	4
Battery temperature sensor	Yes
General
Auxiliary output(5)	Yes (32A)
Programmable relay(6)	Yes (3x)
Protection(2)	a - g
VE.Bus communication port	For parallel and three phase operation, remote monitoring and system integration
General purpose com. port(7)	Yes (2x)
Remote on-off	Yes
Common Characteristics	Operating temp. range: 0 - 120 degF (fan assisted cooling) ;Humidity (non condensing): max 95%
Enclosure
Common Characteristics	Material & Colour: aluminum (blue RAL 5012) ; Protection category: IP 21
Battery-connection	M8 bolts (2 plus and 2 minus connections)
120 V AC-connection	Screw-terminal 6 AWG max
Weight	19kg 40 lbs
Dimensions (hxwxd in mm and inches)	362 x 258 x 218 mm 14.3 x 10.2 x 8.6 inch
Standards
Safety	EN 60335-1, EN 60335-2-29
Emission Immunity	EN55014-1, EN 55014-2, EN 61000-3-3
1) Can be adjusted to 60 HZ; 120 V 60 Hz on request
2) Protection key: Output short circuit Overload Battery voltage too high Battery voltage too low Temperature too high 230 VAC on inverter output Input voltage ripple too high
3) Non linear load, crest factor 3:1
4) At 75 øF ambient
5) Switches off when no external AC source available
6) Programmable relay that can a. o. be set for general alarm,DC undervoltage or genset start/stop function AC rating: 230V/4A DC rating: 4A up to 35VDC, 1A up to 60VDC
7) A. o. to communicate with a Lithium Ion battery BMS

Victron Energy PMP123021102 Multi Plus 12/3000/120-50 120V VE Bus Inverter/Charger

Q: Is there a Bluetooth App that can interact with this unit like what is available for the MPPT 100/20 and BMV-712?

Q: Hi, how many amps will the victron 12/3000/120 pull from shore/gen when it is charging batteries at it's max of 120 amps? Thanks!

Q: Can this be mounted with zero overhead clearance.... up against a ceiling ?

Q: In your videos you mention having a DC Disconnect. In my system I plan to have a BlueSea remote disconnect switch at the DC panel. Is this an appropriate method for disconnecting the Inverter when NOT on shore power or is the remote required?

Q: Can this be mounted on a horizontal surface, such as a shelf?

Q: If I have this connected to shore power. My rv has a 400Ah lithium ion battery bank. How long would it take to charge my batteries if they were drawn down to 20%? Thank you

Q: What are the dimensions of the Victron 3000 inverter/charger in inches installed? I have a very tight place I'm looking at mounting it with room for ventilation

Q: What is the ac input current for this unit?

Q: For the AC in and AC out, what size wire will the unit accommodate? 10/3? 8/3? 6/3?

Q: when using the multiplus 12/3000/120 in a system that includes an AC/DC refrigerator, how does one ensure the refrigerator will not draw AC from the inverter when shore power is not available?

Q: Can you use a VE Bus Bluetooth Smart Dongle to setup this inverter?

Q: In a marine installation is there a requirement to use a U/L certified Multiplus? Is it now possible to program a Multiplus from the Iphone app using the Cerbo GX WiFi or Bluetooth?

Q: What cable would I need to connect a Cerbo GX to this inverter/charger?

Q: What size wire should be used from the battery bank to the inverter charger? My old 40amp charger that this is replacing appears to have 6 gauge leads from the charger to the 500ah (soon to be 700ah) LiFePO4 house bank. Will 1/0 gauge be adequate for a 5ft run?

Q: can I run renogy lithium batteries with the Multipass 3000? does the unit pass through shore power without making the fan run i the inverter?

Q: I'm looking to upgrade my Airstream trailer to 400 amp hours of lithium power. What charger/inverter would be best for me? It is essential that I have a hardwired remote panel to monitor and control the system.

Q: do you guys send these out pre-programmed or do I need to do the VE config programing?

Q: Will this work on a travel trailer with a 50 amp service? I'm not powering everything but I want to make sure the built-in transfer switch works for my application before I order. Thank you in advance.

Sign up for our newsletter

Related Items

Recently Viewed Items