Victron Quattro inverter charger

Victron Energy QUA245023110 Quattro 24/5000/120-100/100 120V VE.Bus

On sale ~~$3,423.00~~ $2,909.55

Shipping only available to a commercial address.

Questions about this item? Ask here.

p/n: QUA245023110

Availability: Temporarily out of stock - normally available within two weeks

Quantity

Description
Questions and Answers
Specifications
Additional information

This item is unsuitable for Air Shipping because it is heavy and tends to get damaged in transit. It normally ships on a pallet by LTL freight.

This inverter charger has two AC inputs and two AC outputs. Its integrated transfer switch will automatically connect to the active source. The output has a UPS functionality and the Quattro can take over the power supply to loads so quickly that computers and other equipment and not interrupted

24 volt DC input
Pure Sine Wave 120 volt 60 Hz AC output
2 x 100 Amp transfer switch
120 Amp charger for main battery
4 Amp charger for start battery
Battery temperature sensor included
Optional remote panel available - see below
Multiple units can be configured together to provide 240 volt, three phase or other configurations up to a maximum of 50 kVA output
17.5" x 13" x 9.6" dimensions
66 Lbs
Victron part number QUA245023110 or latest revision

Manufacturers datasheet

Installation and user manuals

Q: I have a 65' Cape Horn steel boat. The system is 60Hz and DC voltage is 24V. AC is 240v split. I want use two Quattro 24/5000/120's. Is there any way I could use the Quattros with 50Hz at the input and get 60Hz at the output? Thank you Art

Asked by: Art - 1/6/2019

A: The Quattros can accept as an input either 50 or 60 Hz and their inverter ouput is programmable and can be either 50 or 60 Hz. However when in shore power pass-through mode they can only put out the same frequency as the input power, they cannot convert it.

Was this answer helpful? 2 of 2 Customer(s) found this Answer helpful.

Answer provided by: Peter Kennedy (1/7/2019)

Submit an answer

Q: Can this serve a 230v receptacle?

Asked by: Minh nguyen - 3/3/2019

A: This is the 120 volt version and only puts out 120 volts. There is also a 230 volt version available. We dont have all the 230 volt versions listed on their site but they are available if you enquire.

For those of you with 120/240 volt systems you can use the 230 volt Quattro, adjust it to be 240 volts in the software, then pair it with a Autotransformer to produce a split phase 120/240 volt system.

Was this answer helpful? 2 of 2 Customer(s) found this Answer helpful.

Answer provided by: Peter Kennedy (3/4/2019)

Submit an answer

Q: I’m looking at 24-5000 inverter chargers. What are the differences between the Multi Plus and the Quattro?

Asked by: Fred - 3/24/2020

The MultiPlus has a single AC input and two AC outputs. If you have two power sources such as generator and shore power you have to provide an external transfer switch to manually select which input source to use.

The Quattro had two AC inputs and two AC outputs. The Quattro will automatically select the active input and so you can eliminate the need for a transfer switch and make operation more automatic and user friendly.

The two outputs have the same function in both cases. One output only works when an external power source is available (shore or generator) and one is available to work at all times (inverter, shore or generator)

Was this answer helpful? 1 of 1 Customer(s) found this Answer helpful.

Answer provided by: Peter Kennedy (3/25/2020)

Submit an answer

Questions about this item? Ask here.

Quattro	24/5000/120-100/100 120V
PowerControl / PowerAssist	Yes
Integrated Transfer switch	Yes
AC inputs (2x)	Input voltage range: 90-140 VAC ; Input frequency: 45 ? 65 Hz ; Power factor: 1
Maximum feed through current (A)	2 x 100
Inverter
Input voltage range (V DC)	19 ? 33
Output (1)	Output voltage: 120 VAC ñ 2% ; Frequency: 60 Hz ñ 0,1%
Cont. output power at 25 øC (VA) (3)	5000
Cont. output power at 25 øC (W)	4500
Cont. output power at 40 øC (W)	4000
Peak power (W)	10000
Maximum efficiency (%)	94
Zero-load power (W)	25
Zero load power in AES mode (W)	20
Zero load power in Search mode (W)	5
Charger
Charge voltage 'absorption' (V DC)	28,8
Charge voltage 'float' (V DC)	27,6
Storage mode (V DC)	26,4
Charge current house battery (A) (4)	120
Charge current starter battery (A)	4
Battery temperature sensor	Yes
General
Auxiliary output (A) (5)	50
Programmable relay (6)	3x
Protection (2)	a-g
VE.Bus communication port	For parallel and three phase operation, remote monitoring and system integration
General purpose com. port (7)	Yes, 2x
Remote on-off	Yes
CommonCharacteristics	Operating temp.: -20 to +50 °C (0 - 120øF) Humidity (non condensing): max. 95%
Enclosure
Common Characteristics	Material & Colour: aluminium (blue RAL 5012) ; Protection category: IP 21
Battery-connection	Four M8 bolts (2 plus and 2 minus connections)
230 V AC-connection	M6 bolts
Weight (kg)	66 lb 30 kg
Dimensions (h x w x d)	17,5 x 13,0 x 9,6 inch ; 444 x 328 x 240 mm
Standards
Safety	EN 60335-1, EN 60335-2-29
Emission, Immunity	EN55014-1, EN 55014-2, EN 61000-3-3
1) Can be adjusted to 50 Hz
2) Protection key: Output short circuit Overload Battery voltage too high Battery voltage too low Temperature too high 120 VAC on inverter output Input voltage ripple too high
3) Non linear load, crest factor 3:1
4) At 25°C ambient
5) Switches off when no external AC source available
6) Programmable relay that can be set for general alarm, DC undervoltage or genset start/stop function AC rating: 120V/4A DC rating: 4A up to 35VDC, 1A up to 60VDC
7) A. o. to communicate with a Lithium Ion battery BMS

Manufacturers website

Manufacturers Datasheet

Victron Energy ASS030140000 MK3-USB Interface (VE.Bus to standard USB)

~~$85.00~~ $72.25 Sale

In stock

Add To Cart

Victron Energy BPP010300100 Color Control GX

~~$638.00~~ $542.30 Sale

In stock

Add To Cart

Victron Energy REC020005010 Multi Control for Multi-Plus and Quattro

~~$182.00~~ $154.70 Sale

In stock

Add To Cart

Victron Energy QUA245023110 Quattro 24/5000/120-100/100 120V VE.Bus

Q: I have a 65' Cape Horn steel boat. The system is 60Hz and DC voltage is 24V. AC is 240v split. I want use two Quattro 24/5000/120's. Is there any way I could use the Quattros with 50Hz at the input and get 60Hz at the output? Thank you Art

Q: Can this serve a 230v receptacle?

Q: I’m looking at 24-5000 inverter chargers. What are the differences between the Multi Plus and the Quattro?

Related Items

Recently Viewed Items