Victron SBS050100200 Bluetooth Smart Battery Sense

Victron Energy SBS050100200 Bluetooth Smart Battery Sense

On sale ~~$46.00~~ $39.10

Bluetooth remote sensor for voltage

Questions about this item? Ask here.

p/n: SBS050100200

Availability: In stock

Quantity

Description
Questions and Answers
Additional information

Smart Battery Sense is a wireless battery voltage-and-temperature sensor. Although it is designed specically for Victron MPPT Solar Chargers it can be used anywhere. The display can be shown on a phone or tablet. It is ideal for out of the way batteries like generator starting batteries or bow thruster batteries. When used with a Victron MPPT Solar Charger the charger uses the measurements to optimize its charge parameters. The accuracy of temperature data will improve battery charging efficiency, and prolong battery life. The connection between Smart Battery Sense and one or more Solar Charger(s) is wireless: It uses VE.Smart Network - a wireless technology based on Bluetooth Smart. Simple to install & configure, Smart Battery Sense comes with an inline fuse and pre-crimped eyelets. Revealing the self-adhesive tape on the back allows you to mount it directly on the battery.

Operating voltage range 8V to 60V
Operating temperature range -10°C to +60°C
Cable length 45cm
Dimensions 13 x 38 x 37 mm h x w x d
See the "additional information" tab for compatibility
Instruction manual

Q: If I have two smart sense devices monitoring two different banks, can each device be given a unique name or alias in the VictronConnect app? A support doc that was over 1 year old said not yet, but the connect app has seen some decent updates lately. Can this be tested to get a current status?

Asked by: Mike - 6/4/2019

A: You can identify them by their serial numbers but you cannot name them, as of June 2019

Was this answer helpful? 4 of 4 Customer(s) found this Answer helpful.

Answer provided by: Peter Kennedy (6/4/2019)

Submit an answer

Q: is this compatable with the Victron mppt 50 amp solar charger for reading amp input..?

Asked by: tom balcom - 2/15/2019

A: The Smart Battery Sense measures battery volts and temperature. It doesnt measure amps. It can be networked with a Victron Bluetooth equipped MPPT charge controller and the charge controller will work better because it is measuring the voltage at the battery where it is not affected by voltage drops. It also uses the battery temperature to modify the charge profile. You can set up the network within the Victron Connect app on your phone, tablet or Bluetooth equipped Mac or PC

Was this answer helpful? 1 of 1 Customer(s) found this Answer helpful.

Answer provided by: Peter Kennedy (2/15/2019)

Submit an answer

Q: What is the voltage reading accuracy?

Asked by: Scott - 7/13/2018

No Answers have been submitted yet.

Submit an answer

Questions about this item? Ask here.

Victron Energy BAM010700000 BMV 700 Precision Battery Monitor

~~$169.00~~ $143.65 Sale

In stock

Add To Cart

Ancor 124510 Tinned Copper Safety Duplex Boat Cable 14/2 awg - 100 ft roll

~~$65.74~~ $49.95 Sale

In stock

Add To Cart

Blue Sea 1733 Mini Digital DC Voltmeter with OLED display

~~$50.99~~ $36.77 Sale

In stock with Free Shipping for orders over $45

Add To Cart

Components > Meters > Meter Accessories > Data Connections
Components > Meters > Digital Meters

Victron Energy SBS050100200 Bluetooth Smart Battery Sense

Q: If I have two smart sense devices monitoring two different banks, can each device be given a unique name or alias in the VictronConnect app? A support doc that was over 1 year old said not yet, but the connect app has seen some decent updates lately. Can this be tested to get a current status?

Q: is this compatable with the Victron mppt 50 amp solar charger for reading amp input..?

Q: What is the voltage reading accuracy?

5. FAQ

Q1: Will you be adding wireless parallel charging as a feature?

Q2: Can several MPPTs be paired to one Smart Battery Sense or BMV?

Q3: Is VE.Smart Networking disrupted if I connect a smartphone to it at the same time?

Q4: Will you add the same functionality to the BlueSmart Charger product range?

Q5: Can Smart Battery Sense be used as a standalone product?

Q6: Can I use Smart Battery Sense in systems already controlled by a CCGX/Venus GX?

Related Items

Browse Similar Items

Recently Viewed Items