Skylla TG 24 Volt charger

Victron Energy SDTG2400801 Skylla Skylla-TG 24/80(1+1) 230V Battery Charger

On sale ~~$1,417.00~~ $1,204.45

24 Volt 80 Amp Battery Charger with two isolated outputs

Questions about this item? Be the first to ask here.

p/n: SDTG2400801

Availability: Temporarily out of stock - normally available within two weeks

Quantity

Description
Specifications
Additional information
Questions & Answers

This charger is for 230 Volts and is considered a special order and is not returnable

Universal input voltage battery charger operates on 185-264 volts AC 50/60 Hz or 180-400 Volts DC and produces a nominal 24 Volts DC output at 80 Amps to a single output with an auxiliary output of 4 Amps. This is Victron Energy model number SDTG2400801. The correct remote panel to go with this charger is the SDRPSKC

Microprocessor controlled three stage charging
Output adjustable for battery type
Recommended for 24 Volt battery banks of 400-800 Amp hour capacity
Remote sensing of voltage to compensate for voltage drop in cables
Battery temperature sensor included
Can be used as a stand-alone power supply
An optional remote on off switch may be fitted
An optional remote voltage alarm may be fitted
22 Lbs Weight. Dimensions 14.4" x 9.9" x 10.1"

Victron Energy BAM010700000 BMV 700 Precision Battery Monitor

~~$130.00~~ $110.50 Sale

In stock

Add To Cart

Skylla	24/80 TG
Input voltage (V AC)	230
Input voltage range (V AC)	185-264
Input voltage range (V DC)	180-400
Frequency (Hz)	45-65
Power factor	1
Charge voltage 'absorption' (V DC)	28,5
Charge voltage 'float' (V DC)	26,5
Charge current house batt. (A) (2)	80
Charge current starter batt. (A)	4
Charge characteristic	IUoUo (three step)
Battery capacity (Ah)	500-1000
Temperature sensor	Included
Can be used as power supply	Yes
Remote alarm	Potential free contacts 60V / 1A (1x NO and 1x NC)
Forced cooling	Yes
Protection (1)	a,b,c,d
Operating temp. range	-20 to 60°C (0 - 140°F)
Humidity (non condensing)	Max 95%
Enclosure
Material & Colour	Aluminium (blue RAL 5012)
Battery-connection	M8 studs
230 V AC-connection	Screw-clamp 2,5 mm² (AWG 6)
Protection category	IP 21
Weight kg (lbs)	10 (22)
Dimensions hxwxd in mm (h x w x d in inches)	365 x 250 x 257 (14.4 x 9.9 x 10.1)
Standards
Safety	EN 60335-1, EN 60335-2-29
Emission	EN 55014-1, EN 61000-3-2
Immunity	EN 55014-2, EN 61000-3-3
1) Protection Output short circuit Battery reverse polarity detection
2) Up to 40°C (100°F) ambient

Victron Energy SDTG2400801 Skylla Skylla-TG 24/80(1+1) 230V Battery Charger

Related Items

Recently Viewed Items