Balmar APM-12 Alternator Protection Module for 12 volt systems

On sale ~~$89.99~~ $80.99

Protection device for 12 volt alternators

Questions about this item? Ask here.

p/n: APM-12

Availability: In stock

Quantity

Description
What's in the Box
Additional information
Questions & Answers

If an alternator output is disconnected when the engine is running there is nowhere for the power to go and the voltage will rise until something fails. The Balmar APM-12 can be used protect alternators from the damaging effects of battery switch disconnects, or Lithium battery disconnects. It can protect from both short and longer duration voltage surges. It operates by creating a short circuit and taking the alternator output to ground. It is a small device and it has its limits, so it is self testing, see the additional information tab for more details.

Meets ISO 16750-2 for Load-Dump Surge Specification,
ISO-7637-2 for Surge Capability,
SAE J1171 for ignition protection
ASTM B117 for Salt Spray/Fog
For 12 volt systems
5/16" ring terminals
Product Datasheet

Q: Can this device absorb a high ampere surge?

Asked by: Jeff in Jax - 8/29/2022

A: Yes up to a point. But here is the disclaimer: No surge protection device can protect against unlimited surges in either amplitude, power or duration. In certain cases it is possible that the APM will provide protection, but in the process become damaged so that it no longer provides protection. In this event, the APM LED will turn red, and it will begin to give a chirping sound. In extreme cases such as lightning strikes, the APM can be damaged to the point it no longer functions or provides feedback. Meets ISO 16750-2 for Load-Dump Surge Specification, ISO-7637-2 for Surge Capability, SAE J1171 for ignition protection and ASTM B117 for Salt Spray/Fog.

Was this answer helpful? 2 of 2 Customer(s) found this Answer helpful.

Answer provided by: Peter Kennedy (8/30/2022)

Submit an answer

Q: What are the APM-12 product dimensions?

Asked by: John - 12/28/2021

A: The overall length is just under 2.75 inches

Was this answer helpful? 1 of 1 Customer(s) found this Answer helpful.

Answer provided by: Peter Kennedy (2/2/2022)

Submit an answer

Q: Where is the APM body mounted? How should it be attached?

Asked by: Pleiades - 8/25/2023

A: It goes directly on the back of the alternator and you can attached it with the included wireties.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Peter Kennedy (8/28/2023)

Submit an answer

Questions about this item? Ask here.

DISCLAIMER:

No surge protection device can protect against unlimited surges in either amplitude, power or duration. In certain cases it is possible that the APM will provide protection, but in the process become damaged so that it no longer provides protection. In this event, the APM LED will turn red, and it will begin to give a chirping sound. In extreme cases such as lightning strikes, the APM can be damaged to the point it no longer functions or provides feedback. Meets ISO 16750-2 for Load-Dump Surge Specification, ISO-7637-2 for Surge Capability, SAE J1171 for ignition protection and ASTM B117 for Salt Spray/Fog.

PRESS RELEASE

Balmar Announces Release of New Alternator Protection Module February 3, 2022

Huntsville, AL – Balmar LLC, the leading manufacturer of onboard DC charging systems for cruising sail, powerboat and RV motorhomes announced today the release of a new family of Alternator Protection Modules (“APM”). Shipment of the APM-12 (for 12 volt systems) and APM-24 (for 24 volt systems) began February 1st.

Mounted conveniently on the rear of any alternator, the Balmar APM is designed to absorb voltage and current spikes that commonly occur in many onboard electrical distribution systems from intermittent connections, disconnects and over-voltage events. Lithium battery adoption has introduced a new problem if a battery disconnects due to an internal fault or issue. A battery initiated disconnect during charging can induce a voltage surge which will damage the alternator’s rectifier diodes or internal regulator and render the unit inoperable. The Balmar APM excels in both short duration and longer duration spikes, where other products fail.

The APM-12 will clamp up to a 60 volt spike and sustained over voltage conditions beginning around 20 volts. The APM-12 can absorb multiple surges of such energy to continually protect an alternator and other devices on the electrical distribution network. Visual and audible alarms indicate if the device has been compromised and needs replacement. The Balmar APM family meets ISO 16750-2 for Load Dump Protection and ISO 7637-2 for Surge Protection. The APM can be deployed to protect either Balmar or other manufacturer’s charging systems.

“The APM family provides an extra level of protection against electrical system anomalies.” explained Chris Witzgall, Balmar Product Manager. “Proper grounding practices and solid connections are still the best protection against unintended damage to electrical components. Our lab testing demonstrates that it is very difficult to damage unprotected Balmar alternators, yet we know these events can occur in many installations and use cases. The APM adds another level of fault protection against unforeseen events.”

Balmar APM’s are available around the world through its business channel partners. For more information and to locate a Balmar dealer, retail outlet or distribution partner go to www.balmar.net or call +1-800-467-3371.

Balmar BBU Universal Belt Buddy Tensioner (without adjustment arm)

~~$55.99~~ $50.99 Sale

In stock

Add To Cart

Balmar 15-TSS Tach Signal Stabilizer

~~$89.99~~ $80.99 Sale

In stock

Add To Cart

Balmar 10-4047 Spacer 1"

$14.99

In stock

Add To Cart

Balmar 1011 Wiring Harness, 94 Series, 12v, Black Tee-Style Field/Stator Plug

~~$54.99~~ $48.99 Sale

Special order - takes a few days

Add To Cart

Balmar 10-4000 Spacer 1/2"

$14.99

In stock

Add To Cart

Balmar PAS-0111 internal regulator for Balmar 6 series 12 volt alternators

$59.95

Temporarily out of stock - Availability typically 7-10 days

Add To Cart

Balmar APM-12 Alternator Protection Module for 12 volt systems

Q: Can this device absorb a high ampere surge?

Q: What are the APM-12 product dimensions?

Q: Where is the APM body mounted? How should it be attached?

Related Items

Recently Viewed Items