Ross Lukeman Camper Van Projects
Posted by George Kaye on 9/26/2019 to
Camper Vans
Camper van projects by Ross Lukeman
(0) Comments
Dixon Marine Sprinter Van
Posted by George Kaye on 9/26/2019 to
Camper Vans
Dixon Marine sprinter van setup
Lithium Battery Installation - example from Sailbits.Com
Posted by Steve Michell of SailBits.com on 9/18/2019 to
Batteries (Lithium Ion)
This is to introduce an article written by one of our customers about his experiences installing a Lithium Battery System on his Beneteau
Testing your Lithium Ion battery system
Posted by Peter Kennedy on 9/18/2019 to
System Integration
When you have completed your lithium battery system you need to take if for an extended test drive so that you understand fully that it works the way it was designed. Don't assume it works, try it out. Programming your Victron MultiPlus inverter charger with the VE Configure program - Part 3 - "The Assistants"
Posted by Peter Kennedy on 9/18/2019 to
Victron MultiPlus and Quatro
Programming with the VE Configure program is easy. Part 1 of the Blog Post described the proceedure. Part 2 described the settings, and this is Part 3 which discusses the use of "Assistants" which are apps you can load and which control how the MultiPlus behaves in certain circumstances.
Programming your Victron MultiPlus inverter charger with the VE Configure program - Part 2 - The Settings
Posted by Peter Kennedy on 9/18/2019 to
Victron MultiPlus and Quatro
Programming with the VE Configure program is easy and Part 1 of this Blog Post described the procedure. This part describes the settings themselves.
Programming your Victron MultiPlus inverter charger with the VE Configure program - Part 1 - The Proceedure
Posted by Peter Kennedy on 9/18/2019 to
Victron MultiPlus and Quatro
Programming with the VE Configure program is so easy compared to trying to program your MultiPlus using the dipswitches. You will require the Mk3USB interface. Here are part 1 of the instructions which describes the proceedure. Part 2 wil then go into the settings themselves. Since this article was written Victron have updated the instruction manual for the VE Configure program. You can read about it on my updated Blog Post
Installing your Victron MultiPlus Inverter Charger
Posted by Peter Kennedy on 9/18/2019 to
Victron MultiPlus and Quatro
The post details unpacking, mounting and wiring your new MultiPlus, subsequent articles will detail the programming options.
Demo Lithium Battery System
Posted by Peter Kennedy on 9/18/2019 to
Batteries (Lithium Ion)
I'm building a complete Lithium Battery System as a demo to take to the Annapolis Boat Show. As I build the system I will be writing about it in this blog post. So check back again as this post will change from day to day. The entire installation will be online on the Victron VRM Portal and you will be able to check in and see the state of charge and useage statistics.......
Demo Lithium Battery System - the details
Posted by Peter Kennedy on 9/18/2019 to
Batteries (Lithium Ion)
I made a Lithium Battery System on a mobile cart to use as a demonstration and to take to the Annapolis Boat Show. This article is about the details of how it was put together and why, and includes all the various settings used.
PKYS Index
Posted by George Kaye on 9/10/2019 to
PKYS online store
Taiwan Truck Photos
Posted by George Kaye on 9/6/2019 to
Camper Vans
Customers van in Taiwan using Victron Energy products
Single Fuel Sailing
Posted by George Kaye on 9/5/2019 to
Alternators
One engine, two jobs, less fuel. Single fuel sailing - simple and safe.
Wiring Unlimited
Posted by George Kaye on 9/3/2019 to
Electrical Standards
The
wiring unlimited book is a great reference for anybody learning how to wire
Victron Energy products. The book outlines electrical wiring systems containing
batteries, inverters, charger and inverter/chargers. Victron Energy aims for
this book to help clear up any confusion the consumer might have with wiring their
products.
Peter Kennedy has been in business since 1991 designing, installing and servicing marine electrical systems. The purpose of this blog is to offer support to both professional installers and do-it-yourself boat owners who wish to undertake this work themselves.
SEARCH
You can subscribe to get automatic notifications of new blog posts, this is separate from a newsletter subscription.