Victron Energy LYN034170210 Lynx Smart BMS 1000 (M10)

On sale ~~$1,470.00~~ $1,249.50

1000 Amp Battery Management System for Victron Smart Lithium Batteries - M10 terminals

Questions about this item? Be the first to ask here.

p/n: LYN034170210

Availability: In Stock

Quantity

Description
Specifications
Additional information
Questions & Answers

This is the 1000 amp version of the Lynx Smart BMS, designed for super heavy duty systems. The M10 in the part name refers to the 10mm terminals it uses. The 1000 amp rating requires a more robust terminal, and this then requires the use of matching M10 Lynx Distributors.

Built in 1000 Amp Contactor acts as a fail-safe emergency shut off
Built in Battery Monitor
Pre-Alarm signal give a warning before shutoff
Built in Bluetooth
Local and remote monitoring when used with a Cerbo GX
For use with Victron Smart Lithium Batteries only
Instruction manual
Drawing with dimensions
Comes with a 5 year warranty - Extended warranty available

Tech Tip

Don't confuse amps and amp hours. Amp hours is a measure of battery capacity, amps is a measure of current. This is a heavy duty BMS capable of carry 1000 amps. It would typically be used in a super heavy duty system. Just because you have 1000 amp hours of batteries doesn't mean you have to use this BMS.

Technical specifications

Power	Lynx Smart BMS 500A	Lynx Smart BMS 1000A
Supply voltage range	9 – 60Vdc
Supported system voltages	12, 24 or 48V
Reverse polarity protection	No
Main safety contactor continuous current rating	500A continuous	1000A continuous
Main safety contactor peak current rating	600A for 5 minutes	1200A for 5 minutes
Power consumption OFF mode	0.3mA for all system voltages
Power consumption in Standby mode	Approximately 0.6W (50mA at 12V)
Power consumption in ON mode	Approximately 2.6W (217mA at 12V) depending on the state of the relays	Approximately 4.2W (350mA at 12V) depending on the state of the relays
Minimum load resistance for pre-charging	10O and above for 12V systems 20O and above for 24V and 48V systems
AUX output maximum current rating	1.1A continuous, protected by resettable fuse
Allow-to-charge port maximum current rating	0.5A at 60Vdc, protected by resettable fuse
Allow-to-discharge port maximum current rating	0.5A at 60Vdc, protected by resettable fuse
Programmable relay (SPDT) maximum current rating	2A at 60Vdc

Connections	Lynx Smart BMS 500A	Lynx Smart BMS 1000A
Busbar	M8 (Torque: 14 Nm)	M10 (Torque: 33 Nm) (14Nm for units with a serial number before HQ2340XXXX)
VE.Can	RJ45 and RJ45 terminator
I/O	Removable multi-connector with screw terminals
Battery BMS cables	Male and female circular 3-pole connector with M8 screw ring Up to 20 batteries can be connected to the BMS by daisy chaining them
Lynx Distributor (up to 4 modules)	RJ10 (cable ships with each Lynx Distributor)

Physical	Lynx Smart BMS 500A	Lynx Smart BMS 1000A
Enclosure material	ABS
Enclosure dimensions (h x w x d)	190 x 180 x 80mm	230 x 180 x 100mm
Unit weight	1.9 kg	2.7 kg
Busbar material	Tinned copper
Busbar dimensions (h x w)	8 x 30mm

Environmental	Lynx Smart BMS 500A	Lynx Smart BMS 1000A
Operating temperature range	-40°C to +60°
Storage temperature range	-40°C to +60°
Humidity	Max. 95% (non-condensing)
Protection class	IP22

Standards	Lynx Smart BMS 500A	Lynx Smart BMS 1000A
Safety	EN-IEC 63000:2018
EMC	EN-IEC 61000-6-3:2007/A1:2011/AC:2012
QMS	NEN-EN-ISO 9001:2015

Victron Energy LYN060102010 Lynx Distributor (M10)

~~$261.00~~ $221.85 Sale

Temporarily out of stock - normally available within two weeks

Add To Cart

Victron Energy LYN034170210 Lynx Smart BMS 1000 (M10)

Technical specifications

Related Items

Browse Similar Items

Recently Viewed Items