1. Home
  2. DC Power
  3. Alternators and Regulators
  4. Alternator regulators
  5. Balmar regulators and accessories
  6. Balmar MC-618-H Voltage Regulator with harness 12 Volts
Balmar MC-618-H Voltage Regulator with harness 12 Volts
Balmar MC-618-H Voltage Regulator 12 Volts

Balmar MC-618-H Voltage Regulator with harness 12 Volts

On sale $367.00 $328.00
This is the latest Balmar 12 volt regulator with harness
p/n: MC-618-H
Availability: In stock
This is the latest in the Max Charge series and replaces the MC-614-H.  It has a data port which allows it to be programmed and monitored by the Balmar SG200 and its Bluetooth Dongle. (sold separately)  Programming can also still be done the old fashioned way using the included magnetic screwdriver. Note that using the programming app requires additional equipment, see the "Additional Information" tab for details

  • Intelligent multi-stage regulation. 
  • Digital numeric LED display. 
  • Epoxy-encapsulated circuitry. 
  • For use with 12 volt systems 
  • Wiring harness included 
  • Can be used to drive twin alternator installations. 
  • For use with P-type externally regulated alternators 
  • Dash lamp and auxiliary lamp terminals 
  • Small engine mode 
  • Magnetic programming tool included 
  • LiFePo4 (lithium) program 
  • Optional alternator and battery temperature sensors (sold separately)
  • Optional external programming capability (requires additional equipment sold separately)
  • Instruction manual
  • Wiring diagram






Tech Tip

When comparing the MC-618 to the ARS-5 the MC-618 has a number of options that you might like to use in the future even if you don't use them now, so getting it will "future proof" your installation somewhat.

  • The MC-618 can power the higher output alternators, the ARS is too small to get full output from the XT alternators
  • It has an external voltage sense wire that means you can sense downstream of a battery isolator, you cant use the ARS with a battery isolator
  • The external voltage sense wire allows it to measure delivered voltage and thus compensate for any voltage drop in the cable from the alternator to the battery
  • The MC-618 can integrate with the SG200 suite of gear so it can be programmed from your phone, and its status and any alarms can read on the SG200 display
  • And finally the MC-618 has a built in Lithium profile






Related Items

Balmar MC-TS-A Alternator Temperature Sensor
$42.99 $38.99 Sale
In stock
Balmar MC-TS-B Battery Temperature Sensor
$53.99 $47.99 Sale
In stock
Balmar SG200 battery monitor kit
$249.00 $229.00 Sale
In stock
Balmar SG2-0300 Bluetooth Gateway for SG200
$59.99 $54.99 Sale
In stock


Recently Viewed Items

TOP