Orion-Tr Smart DC-DC Charger Isolated 360 – 400 Watt
48/48/-8 (380 W)
Input voltage range (1)
32-70 V
Under voltage shut down
28 V
Under voltage restart
30 V
Nominal output voltage
48.2 V
Output voltage adjust range
40-60 V
Output voltage tolerance
+/- 0.2mV
Output noise
2 mV rms
Cont. output current at nominal output voltage and 40°C
8 A
Maximum output current (10 s) at nominal output voltage
15 A
Short circuit output current
25 A
Cont. output power at 25°C
430 W
Cont. output power at 40°C
380 W
Efficiency
89%
No load input current
< 80 mA
Standby current
Less than 1 mA
Galvanic isolation
200 V dc between input, output and case
Operating temperature range
-20 to +55° C (derate 3% per °C above 40° C)
Humidity
Max. 95% non-condensing
DC connection
Screw terminals
Maximum cable cross-section
16 mm² AWG6
Weight
1.6 kg (3.5 lb)
Dimensions hxwxd
130 x 186 x 70 mm (5.1 x 7.3 x 2.8 inch)
Standards: Safety
Emission
Immunity
Automotive Directive
EN 60950
EN 61000-6-3, EN 55014-1
EN 61000-6-2, EN 61000-6-1, EN 55014-2
ECE R10-5
1) If set to nominal or lower than nominal, the output voltage will remain stable within the specified input voltage range (buck-boost function). If the output voltage is set higher than nominal by a certain percentage, the minimum input voltage at which the output voltage remains stable (does not decrease) increases by the same percentage.
Note 1) The VictronConnect App will not display current in or current out.
Note 2) The Orion-Tr Smart DC-DC Charger Isolated is not equipped with a VE.Direct port.
.jpg&maxx=450&maxy=0)
