Victron Energy PSC241651095 Phoenix Smart IP43 Charger 24/16(1+1) for 120-240 Volt input

On sale ~~$437.00~~ $371.45

24 Volt 16 Amp Battery Charger with one main and one aux. output

Questions about this item? Be the first to ask here.

p/n: PSC241651095

Availability: In stock

Quantity

Description
Specifications
Questions & Answers

This is super light, compact, versatile and relatively inexpensive and is destined to be a best seller.. It has Bluetooth built-in so it can be programmed from your phone or tablet using Victron Connect. Its VE Direct port means you can connect it to a Cerbo GX. Its remote port means you can control it from a BMS. Its relay port means you can control external devices from it (only while connected to AC power). It has a 6 stage charge algorithm with storage mode for conventional batteries and a 3 stage algorithm for Lithium batteries. Its IP rating gives it limited protection from sprayed water.

85-265 volt input, 45-65 Hz, 24 volt 16 amp one main output plus an auxiliary low power output
Fully programmable charge algorithm accessed via a phone, tablet, Mac or PC using Bluetooth and /or VE Direct using the Victron Connect App
6 Stage charge algorithm for conventional batteries, 3 stage for lithium batteries
IEC 320 C14 inlet with retainer clip (AC Power Plug with country specific plug must be ordered separately - see "related items" link below)
VE Direct port
Suitable for use with Li Ion batteries
Datasheet
Instruction manual
IP43 protection
Dimensions 7.1" high x 9.8" wide x 4.6" deep

Technical specifications

Specification	12/30 (1+1) & (3)	12/50 (1+1) & (3)	24/16 (1+1) & (3)	24/25 (1+1) & (3)
Nominal input voltage - AC supply	120 – 240VAC
Input voltage range – AC supply	85 – 250VAC (full power from 100VAC, startup from 90VAC)
Input frequency - AC supply	45 - 65Hz
Input voltage - DC supply	90 - 375 VDC
Power factor	>0.99
Max Efficiency - 230VAC / 120VAC	95% / 93%	94% / 92%	96% / 94%	96% /94%
Charge voltage - Absorption / Float / Storage	Normal: 14.4V / 13.8V / 13.2V High: 14.7V / 13.8V / 13.2V Li-ion: 14.2V / N/A / 13.5V		Normal: 28.8V / 27.6V / 26.4V High: 29.4V / 27.6V / 26.4V Li-ion: 28.4V / N/A / 27.0V
Temperature compensation (N/A for Li-ion)	-16mV/°C		-32mV/°C
Charge algorithm	6-stage adaptive (3 stage for Li-ion)
Max output current - Normal mode	30A	50A	16A	25A
Max output current - Low current mode	15A	25A	8A	12.5A
Max output current - Starter battery	4A (1+1 output models only)
Back drain current	<1mA
Max battery capacity (recommended)	300Ah	500Ah	160Ah	250Ah
Min battery capacity - Normal mode	Lead: 120Ah Li-ion: 60Ah	Lead: 200Ah Li-ion: 100Ah	Lead: 64Ah Li-ion: 32Ah	Lead: 100Ah Li-ion: 50Ah
Min battery capacity - Low current mode	Lead: 60Ah Li-ion: 30Ah	Lead: 100Ah Li-ion: 50Ah	Lead: 32Ah Li-ion: 16Ah	Lead: 50Ah Li-ion: 25Ah
Data communication	VE.Direct and Bluetooth (via VictronConnect app)
Bluetooth power and frequency	-4dBm \| 2402 - 2480MHz
Remote on/off	Yes (2 pole terminal)
Programmable relay	Yes (SPDT - 5A up to 250VAC / 5A up to 28VDC)
Operating temperature	-20 to +60°C (0 - 140°F) Full rated output up to 40°C
Max humidity	95%
Enclosure
Material and colour	Aluminium \| Blue RAL 5012
AC connection	IEC 320 C14 inlet with retainer clip (AC cord ordered separately)
Battery connection	Screw terminals 16 mm² (AWG6)
Number of battery connections	(1+1) models: 2 (2nd output via 2 pole terminal) \| (3) models: 3
Protection category	Electronic components: IP43 \| Connection area: IP22
Weight	2.7 kg (6.0 lbs)
Dimensions (h x w x d)	180 x 249 x 116mm (7.1 x 9.8 x 4.6 inch)
Compliance standards
Safety	EN 60335-1, EN 60335-2-29
Emission	EN 55014-1, EN 61000-6-3, EN 61000-3-2
Immunity	EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3
Vibration	IEC68-2-6:10-150Hz/1.0G

Victron Energy ADA010100400 Mains Cord NEMA 5-15P for Smart IP43 / Skylla-S Charger 2m (For US 120 Volt Systems)

~~$10.00~~ $8.50 Sale

In stock

Add To Cart

Victron Energy PSC241651095 Phoenix Smart IP43 Charger 24/16(1+1) for 120-240 Volt input

Technical specifications

Related Items

Recently Viewed Items